The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
| Leithead | ||||||||||||
| OD |  |  | B | C | ||||||||
| （Mm） | （Mm） | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | M | ||||
| 180 | 16 | 30 | 204 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | |||
| 200 | 16 | 30 | 224 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | |||
| 16 | 30 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | |||||
| 250 | 16 | 25 | 282 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 267 | 16 | 25 | 299 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 273 | 16 | 25 | 305 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 304 | 10 | 20 | 336 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 10 | 20 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||||
| 8.5 | 16 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||||
| 377 | 8.5 | 16 | 409 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 7.5 | 16 | 438 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||||
| 6.5 | 12 | 489 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||||
| 508 | 6 | 10 | 540 | 142 | 250 | 75 | 10 ～ 25 | 40 | 120 | |||
| 5.5 | 10 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 5 | 10 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 762 | 4 | 5 | 794 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||
| 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 1016 | 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | ||||
| 3.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | |||||
| 1219.2 | 48.000 | 1215-1224 | 3.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | ||
| 1320.8 | 52.000 | 1316-1325 | 3 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 56.000 | 1418-1427 | 3 | 5 | 1454.4 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1524 | 60.000 | 2.5 | 5 | 1556 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1625.6 | 64.000 | 1621-1631 | 2.5 | 5 | 1657.6 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| 1727.2 | 68.000 | 1722-1732 | 2.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1828.8 | 72.000 | 1824-1834 | 2 | 5 | 1860.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| 1930.4 | 76.000 | 1925-1935 | 2 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 2032 | 80.000 | 2027-2037 | 2 | 5 | 2064 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| V1 | V2 | V3 | V4 | V5 | V6 | |
| AISI 304 | AISI 316L | AISI 316L | AISI 304 | |||
| Bolg | AISI 304 | AISI 316L | AISI 304 | AISI 304 | ||
| Barra | AISI 304 | AISI 316L | AISI 304 | AISI 304 | ||
| Cuir isteach stiall (roghnach) | AISI 301 | AISI 301 | AISI 301 | AISI 301 | AISI 301 |
| Ábhar séala | Na meán | Fadteocht |
| EPDM | Gach caighdeán uiscí, fuíolluisce, aer, solaid agus táirgí ceimiceacha | -30 ℃ suas le+120 ℃ |
| Leacht ardteochta, ocsaigin, ózón, uisce agus mar sin de | -70 ℃ suas le+260 ℃ | |
| FPM/FKM | Ózón, ocsaigin, aigéid, gás, ola agus breosla (ach amháin le stiall a chur isteach) | 95 ℃ Suas le+300 ℃ |